Attic Insulation Cost and Savings Calculator

Attic insulation The heat stays inside R-38to R-60 depending on your zone

Insulating the attic costs about $900 to $3,600 for a 1,100 to 1,500 sq ft attic with blown-in insulation, according to HomeGuide, and can cut the heating and cooling bill by 10% to 20%. The actual result depends on your region, the insulation you already have and whether you seal air leaks first.

Calculate the cost and savings of insulating your attic

Estimated cost–
Savings per year–
Payback–
Recommended R-value–

Our own calculation. Prices per sq ft and removal: HomeGuide; sealing: Angi (2022). The savings apply HomeGuide’s 10% to 20% to the bill you enter (the starting value is only an example). The R-value comes from the ENERGY STAR table for existing homes. It does not include extra labor or moisture problems.

What it costs by type of insulation

$0$3,000$6,000$9,000$12,000Total installed cost of insulating a 1,100 to 1,500 sq ft attic (dollars)Reflective$550–$3,300Blown-in (fiberglass or cellulose)$900–$3,600Loose-fill$1,100–$3,800Batts or rolls$1,100–$3,900Spray foam$1,100–$9,000Structural panels$4,400–$12,000
HomeGuide (undated). The ranges are wide: spray foam goes up to $9,000 (to $6,800 on the attic floor and $9,000 on rafters or the roof deck).
Type of insulationPer sq ftTotal (1,100 to 1,500 sq ft attic)
Batts or rolls$0.80 to $2.60$1,100 to $3,900
Blown-in (fiberglass or cellulose)$0.90 to $2.40$900 to $3,600
Loose-fill$1.00 to $2.50$1,100 to $3,800
Spray foam$1.00 to $4.50$1,100 to $9,000
Reflective$0.50 to $2.20$550 to $3,300
Structural panels$4.00 to $12.00$4,400 to $12,000 or more

Source: HomeGuide (undated). The page itself says “$1,000 to $6,800 or more” in the text and $9,000 in the table for spray foam: they do not reconcile.

What it costs by attic size

Attic areaCost, according to HomeGuide
500 sq ft$500 to $2,000
700 sq ft$700 to $2,800
1,000 sq ft$1,000 to $4,000
1,200 sq ft$1,200 to $4,800
1,500 sq ft$1,500 to $6,000
2,000 sq ft$2,000 to $8,000

Source: HomeGuide, at $1 to $4 per sq ft. The national average it gives is $1,800, between $500 and $6,000. Some companies require a minimum of $1,500 to $2,000 per project.

Other items that can add up

  • Removing the old insulation: $1 to $2 per sq ft (HomeGuide) or $1 to $1.50 (Angi). With removal included, full replacement runs $2 to $6 per sq ft (HomeGuide).
  • Sealing air leaks: $250 to $750 (Angi, 2022).
  • Labor: $55 to $85 per hour, plus materials (Angi, 2022).

A payback example you can adapt

For a 1,200 square foot attic, the HomeGuide table gives $1,200 to $4,800. Suppose, as an illustration, that your heating and cooling cost $1,500 a year. HomeGuide’s 10% to 20% savings would be $150 to $300 a year, and ENERGY STAR’s average of 15% would be about $225. Divide cost by savings and you get anything from about 4 years (a $1,200 job saving $300) to more than 30 (a $4,800 job saving $150). That spread is the honest answer to “is it worth it”: it depends on how much insulation you already have, what you pay for energy and which material you choose. The calculator above lets you test your own numbers.

Seal first, then insulate

Insulation slows heat flow, but air leaking through the attic floor carries heat with it and can make new insulation less effective. The usual leak points are the attic hatch, recessed lights, the tops of interior walls, and the openings around pipes, ducts and wiring. Angi gives $250 to $750 for sealing air leaks, which is small compared with the cost of the insulation itself. Sealing before insulating is advice from every source we reviewed.

What R-value you need

R-value measures how well insulation resists the flow of heat: the higher, the better. HomeGuide notes that the Department of Energy recommends R-30 to R-60 depending on the zone, and ENERGY STAR, R-38 (10 to 14 inches) in most attics and R-49 to R-60 in cold climates. For existing homes, ENERGY STAR gives this table:

Climate zoneUninsulated atticWith 3 to 4 inches
1R-30R-25
2R-49R-38
3R-49R-38
4A and 4BR-60R-49
4C, 5 and 6R-60R-49
7 and 8R-60R-49

Source: ENERGY STAR (undated; based on the 2021 IECC code). Find your zone on the ENERGY STAR map or the DOE.

How much do you really save?

  • HomeGuide: 10% to 20% on heating and cooling, with a typical payback of 3 to 5 years.
  • EPA (ENERGY STAR): on average, 15% on heating and cooling and 11% of total energy spending. The estimate comes from a model of a 1,700 sq ft home from the 1970s to 80s with air sealing and insulation in attics, floors over basements or crawl spaces and basement walls, not with the attic alone.
  • By zone: the same source indicates that total home savings run from 5% in zone 1 to 16% in zone 8: you save more in the north than in the south.

Sources: ENERGY STAR, ENERGY STAR methodology (undated) and HomeGuide.

Details that are easy to miss

  • Keep soffit vents clear. Baffles hold insulation back so air can still move into the attic.
  • Mind the heat sources. Recessed lights and flues need clearances; follow the installer’s guidance.
  • Check depth. Ask for markers or a final measurement to confirm the R-value that you paid for.
  • Deal with moisture first. Wet insulation does not work, so fix any roof or vent leaks beforehand.

Doing it yourself or hiring

Blown-in insulation can be a DIY job, since hardware stores rent the blowers, but you need protective gear, a helper, and careful work around wiring and vents. Removing old insulation, or any that might contain asbestos or vermiculite in an older home, should be left to professionals. If you hire, ask for the R-value in writing, not only the number of bags or inches.

Are there federal incentives?

The federal credit for home energy efficiency improvements covered insulation and air sealing for improvements made through December 31, 2025, according to the IRS (page reviewed April 28, 2026). That date has already passed. Ask about incentives from your state or your utility before hiring.

Source: IRS.

Before you commit

  1. Find out your climate zone and how much insulation you have now.
  2. Use the calculator above with your area and your actual heating and cooling bill.
  3. Seal the attic’s air leaks first.
  4. Ask for at least three quotes with the final R-value, the type of insulation and whether they include removing the old one.
  5. Ask about incentives from your state or utility and check the result when the work is done.
Do I need to remove the old insulation?

Not always. If it is dry, clean and fairly thick, new insulation can often go over it. Removal costs $1 to $2 per square foot according to HomeGuide, and is needed when it is wet, moldy or contaminated.

Which type is best for an attic?

Blown-in fiberglass or cellulose is a common choice for open attic floors. See insulation types compared for the trade-offs.

How much do I need?

It depends on your climate zone. Our R-value guide has the table, and the wall insulation article covers what comes next if the attic is done.

If this raised more questions, Roof Replacement Cost Calculator by State goes into more detail, and Window Replacement Cost Calculator covers the next step.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top