Window Replacement Cost Calculator

$450+$400+$300+

Replacing windows costs, according to HomeGuide, about $450 to $1,500 per installed single-hung window, which is $4,500 to $15,000 for ten windows. This Old House, with a 2026 survey, gives an average of $517 per window and $7,183 per project, with about seven windows. The material, the window type and the glass move the price a lot.

$450 to $1,500Per installed single-hung window, according to HomeGuide (average of $900)
$517Average per window in a This Old House survey (2026)
$7,183Average project with about 7 windows, according to This Old House
25% to 35%Share of the cost that is labor, according to HomeGuide

Calculate the cost of replacing your windows

Cost range–
Per window–
Average cost–

Our own calculation. HomeGuide gives the range per installed window by material, and adds 10% to 20% for low-E glass and $50 to $200 for the permit if you change the size. This Old House gives only the average by material from a survey of 1,000 homeowners in 2026, without breaking out low-E glass. Both prices are national averages or ranges and can vary a lot by region and window type.

What it costs by frame material

$0$1,000$2,000$3,000$4,000Installed cost per window by frame material (dollars)Aluminum$175–$1,000Vinyl$200–$1,500Fiberglass$400–$2,000Composite$400–$2,300Wood$800–$3,800
HomeGuide (undated): prices per installed window.
MaterialHomeGuideThis Old HouseAngi
Aluminum$175 to $1,000$453$75 to $400
Vinyl$200 to $1,500$472$100 to $900
Composite$400 to $2,300$513$300 to $1,200
Fiberglass$400 to $2,000$564$500 to $1,500
Wood$800 to $3,800$544$150 to $1,300

Sources: HomeGuide (undated), This Old House (2026 survey, updated November 8, 2026) and Angi (2023 data, without labor). The three sources use different bases and are not comparable: HomeGuide gives the installed price, This Old House the average from a survey and Angi the price of the unit without labor.

What it costs by window type

Window typeWindow onlyInstalled
Picture (fixed)$200 to $800$300 to $1,300
Single-hung$200 to $1,600$300 to $2,100
Sliding$200 to $1,800$300 to $2,300
Double-hung$250 to $2,000$350 to $2,500
Casement$300 to $2,500$400 to $3,000
Awning$300 to $1,600$400 to $2,000
Garden$700 to $3,000$1,000 to $4,000
Bay$1,500 to $3,500$2,000 to $6,000
Egress$1,000 to $3,500$3,000 to $7,000
Bow$2,000 to $6,000$3,000 to $8,000 or more

Source: HomeGuide. Hurricane or storm windows cost $400 to $1,200 installed, according to the same source.

What it costs to replace all the windows in a house

Number of windowsInstalled cost, according to HomeGuide
5$2,250 to $7,500
10$4,500 to $15,000
15$6,750 to $22,500
20$9,000 to $30,000
25$11,250 to $37,500
30$13,500 to $45,000

Source: HomeGuide. These are installed single-hung window prices, multiplied by the number of windows. This Old House says the average project in its survey was about 7 windows in 2026 (about 9 in early 2025).

Other items that raise the price

ItemCost, according to HomeGuide
Installation$100 to $500 per window (25% to 35% of the total)
Low-E glassAdds 10% to 20%
Triple pane vs. double pane$450 to $3,000 vs. $400 to $2,000 per installed window
Permit for changing the size$50 to $200
Opening up a new hole$500 to $2,000 per window
Repairing rotted siding or trim$2 to $14 per sq ft
Weatherstripping$5 to $10 per window
New screens$100 to $350 per window

Source: HomeGuide.

A budget example for ten windows

To see how the pieces stack, take ten single-hung windows at HomeGuide’s $900 average installed price. That is $9,000. Now add the extras that most often apply (all HomeGuide ranges, our own sum):

  • Low-E glass, which adds 10% to 20% to the window cost: about $900 to $1,800.
  • A permit, if you change the size of an opening: $50 to $200.

That brings the project to roughly $9,950 to $11,000 before any repairs. Siding or trim repair is billed at $2 to $14 per square foot, and a new opening runs $500 to $2,000 per window, so a single surprise can matter. A 10% to 15% contingency is a sensible cushion, which is our suggestion and not a figure from the sources.

Insert or full-frame?

Insert (pocket) replacement

The new window goes inside the existing frame. It is usually faster and cheaper and leaves the trim intact, provided the frame is square and in good condition.

Full-frame replacement

The old window and frame are removed down to the rough opening. It costs more, but it is the way to fix rot, water damage or a change in size, and it lets the installer flash and insulate the opening properly.

Watch for cost overruns

In This Old House’s 2026 survey, 61% paid roughly what was budgeted, but 27% paid more than the initial budget, 14% had unexpected costs during installation, 11% needed follow-up work and 9% suffered damage to walls or trim. That source cites second-floor work, custom modifications and repairing rot or water damage as factors that make labor more expensive.

Protecting yourself from the overruns

The This Old House survey is useful because it tells you how often things go wrong: 27% paid more than their original budget, 14% had unexpected costs during installation, 11% needed follow-up work and 9% had damage to walls or trim. You cannot eliminate that, but you can reduce it:

  • Ask the installer to check the frames and sills for rot before the quote, and to state in writing how rot found during the work will be priced.
  • Take photos of walls and trim before they start.
  • Agree on who handles disposal of the old windows and the clean-up.
  • Pay in stages, with the last payment due after a walk-through, not before.
  • Keep the final invoice with brand and model numbers for warranty claims.

Second-floor work, custom modifications and water damage repairs are the factors that This Old House says raise labor costs. If your house has several of them, expect to land at the upper half of the ranges.

Doing it, step by step

  1. Count your windows and note the type and size of each.
  2. Decide on the material and whether you need low-E glass or double or triple panes.
  3. Use the calculator with both sources to see the range.
  4. Ask for at least three quotes with brand, model, glass, installation, removal and warranty in writing.
  5. Ask about possible extras (siding, trim, permits) and about incentives from your state or utility.

Quick answers

Why are the three sources so different?

They measure different things: HomeGuide gives installed prices, This Old House gives the average from its survey, and Angi gives the unit price without labor. We show them side by side but they are not comparable line by line.

Can I save by replacing only some windows?

You can, and many people do, starting with the worst or the most exposed. A staged project may cost more per window, but it spreads the spending. Compare the total, not only the unit price.

Do the prices include the old window removal?

HomeGuide gives installation at $100 to $500 per window (25% to 35% of the total), but you should confirm in each quote whether removal, disposal and trim are included.

Once you know the cost, the next question is whether it pays back, which we cover in is it worth replacing your windows and double versus triple pane. If you are also planning other work, see how to compare quotes in the roofing quotes guide, whose red flags apply to any contractor.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top