Replacing an asphalt shingle roof on a 2,000-square-foot house costs from about $7,900 in Mississippi to about $15,000 in Hawaii, according to a 2026 table; the national average that source uses is $10,500. Calculate yours based on your state, the size of the house and the material, and compare it with what other sources say.
Calculate the cost of replacing your roof
Our own calculation based on the UseCalcPro state table (2026), which assumes a 2,000-square-foot house with architectural asphalt shingles and tear-off of one layer, with standard permits. We scale linearly by size, which is a simplification. “Premium” (standing-seam metal, synthetic slate) adds 50% to 100% according to that same source; pitch adds $1,000 to $3,000 according to NerdWallet (with Angi data). It is guidance, not a quote.
The cheapest and the most expensive states
Source: UseCalcPro, roofing cost by state (2026). It says it compiles data from Angi, HomeGuide, RoofingCalculator.com, Modernize and RoofReplacementCost.ai, but does not explain how.
Table of the 50 states
These are the averages and ranges from the table the calculator uses. Use it as a relative reference between states, not as an exact price.
| State | Average | Range | Versus the national average |
|---|---|---|---|
| Alabama | $8,300 | $6,800 – $9,800 | -21% |
| Alaska | $11,800 | $9,900 – $13,700 | +12% |
| Arizona | $10,200 | $8,600 – $11,800 | -3% |
| Arkansas | $8,100 | $6,600 – $9,600 | -23% |
| California | $14,000 | $11,900 – $16,100 | +33% |
| Colorado | $11,200 | $9,400 – $13,000 | +7% |
| Connecticut | $12,800 | $10,800 – $14,800 | +22% |
| Delaware | $10,400 | $8,800 – $12,000 | -1% |
| Florida | $11,500 | $9,700 – $13,300 | +10% |
| Georgia | $10,100 | $8,500 – $11,700 | -4% |
| Hawaii | $15,000 | $12,800 – $17,200 | +43% |
| Idaho | $9,500 | $8,000 – $11,000 | -10% |
| Illinois | $11,000 | $9,300 – $12,700 | +5% |
| Indiana | $9,400 | $7,900 – $10,900 | -10% |
| Iowa | $9,200 | $7,700 – $10,700 | -12% |
| Kansas | $9,300 | $7,800 – $10,800 | -11% |
| Kentucky | $8,700 | $7,300 – $10,100 | -17% |
| Louisiana | $9,200 | $7,500 – $10,900 | -12% |
| Maine | $10,800 | $9,100 – $12,500 | +3% |
| Maryland | $11,400 | $9,600 – $13,200 | +9% |
| Massachusetts | $13,000 | $11,000 – $15,000 | +24% |
| Michigan | $10,300 | $8,700 – $11,900 | -2% |
| Minnesota | $11,100 | $9,400 – $12,800 | +6% |
| Mississippi | $7,900 | $6,400 – $9,400 | -25% |
| Missouri | $9,300 | $7,800 – $10,800 | -11% |
| Montana | $9,100 | $7,600 – $10,600 | -13% |
| Nebraska | $9,400 | $7,900 – $10,900 | -10% |
| Nevada | $10,400 | $8,800 – $12,000 | -1% |
| New Hampshire | $10,600 | $8,900 – $12,300 | +1% |
| New Jersey | $13,200 | $11,200 – $15,200 | +26% |
| New Mexico | $8,800 | $7,400 – $10,200 | -16% |
| New York | $13,500 | $11,500 – $15,500 | +29% |
| North Carolina | $10,100 | $8,500 – $11,700 | -4% |
| North Dakota | $8,900 | $7,500 – $10,300 | -15% |
| Ohio | $10,000 | $8,400 – $11,600 | -5% |
| Oklahoma | $8,600 | $7,000 – $10,200 | -18% |
| Oregon | $11,300 | $9,500 – $13,100 | +8% |
| Pennsylvania | $10,500 | $8,900 – $12,100 | 0% |
| Rhode Island | $12,400 | $10,500 – $14,300 | +18% |
| South Carolina | $9,600 | $8,100 – $11,100 | -9% |
| South Dakota | $8,900 | $7,500 – $10,300 | -15% |
| Tennessee | $9,500 | $8,000 – $11,000 | -10% |
| Texas | $9,400 | $7,600 – $11,200 | -10% |
| Utah | $10,300 | $8,700 – $11,900 | -2% |
| Vermont | $10,900 | $9,200 – $12,600 | +4% |
| Virginia | $11,200 | $9,500 – $12,900 | +7% |
| Washington | $12,600 | $10,700 – $14,500 | +20% |
| West Virginia | $8,500 | $7,100 – $9,900 | -19% |
| Wisconsin | $10,200 | $8,600 – $11,800 | -3% |
| Wyoming | $9,000 | $7,500 – $10,500 | -14% |
Why the same roof costs more in some states
The table shows a spread of almost two to one between the cheapest and the most expensive state, and the roof itself is not the main reason. Several things differ from place to place:
- Labor rates and demand. Where crews are scarce or busy, labor costs more.
- Materials and shipping. Remote places, such as Hawaii and Alaska, pay more to bring everything in.
- Codes and weather. Areas with high winds, heavy snow or hail often require stronger fastening, underlayment or ratings.
- Permits and inspections. Fees and rules are local.
- Roof styles. Steeper, more complex roofs are common in some regions.
This is a general explanation: the source table does not break down its averages by cause, so use it to understand why your state sits where it does, not to explain your own quote.
Do the sources agree?
Not entirely. Comparing five states with two other sources, the order between cheap and expensive states is similar, but the amounts vary quite a bit and HomeGuide gives much wider ranges.
| State | UseCalcPro (2026) | SquareDash (2026) | HomeGuide |
|---|---|---|---|
| California | $11,900 – $16,100 (avg. $14,000) | $11,500 – $16,000 | $6,200 – $17,400 |
| New York | $11,500 – $15,500 (avg. $13,500) | $10,800 – $15,200 | $6,200 – $17,400 |
| Florida | $9,700 – $13,300 (avg. $11,500) | $8,800 – $13,600 | $5,400 – $15,200 |
| Ohio | $8,400 – $11,600 (avg. $10,000) | $7,000 – $10,200 | $5,500 – $15,400 |
| Texas | $7,600 – $11,200 (avg. $9,400) | $7,200 – $11,400 | $5,600 – $15,800 |
Sources: SquareDash (April 2026; it says it uses more than 8,900 replacements, with no further detail) and HomeGuide (undated; data from its members’ projects). SquareDash covers only 20 states.
Scaling a state number to your house
The averages in the table assume a 2,000 square foot house. If yours is different, a rough way to adjust is to scale by size. Alabama’s average is $8,300 for 2,000 square feet, so a 2,800 square foot house would be about $11,600 (8,300 × 1.4). That is our own back-of-the-envelope scaling: roof area also depends on pitch, shape and the number of stories, so treat it as a first estimate and ask a contractor to measure your actual roof. Our article on roof cost by house size shows how footprint and roof area differ.
What it costs by material
| Material | Installed cost per square foot | Typical total cost |
|---|---|---|
| Asphalt shingles | $3 to $6 | $7,500 to $14,000 |
| Metal | $5 to $16 | $7,500 to $40,000 |
| Clay or cement tile | $7 to $25 | $10,500 to $62,500 |
| Wood (shakes) | $7 to $15 | $12,900 to $28,200 |
| Slate or stone | $10 to $30 | $22,000 to $70,000 |
| Flat | $3 to $11 | $4,000 to $16,800 |
Source: HomeGuide. Its page is not consistent throughout: it gives $300 to $600 per 100-square-foot square in one place and $400 to $900 in another. The totals assume houses of different sizes.
What adds to the price
| Item | Typical cost | Source |
|---|---|---|
| Very steep roof | $1,000 to $3,000 | NerdWallet (with Angi data) |
| Tearing off the old roof | $1 to $5 per square foot | HomeGuide |
| Decking (roof sheathing) | $2 to $5 per square foot | HomeGuide |
| New or replaced skylight | $1,600 to $4,200 / $800 to $2,400 | HomeGuide |
| Permit, if needed | Up to $500 | NerdWallet |
| Extended warranty | $500 to $5,000 | NerdWallet |
Sources: NerdWallet (with Angi data) and HomeGuide.
How to use this price
- Measure your roof or ask a contractor to do it: the actual roof area is larger than the footprint of the house.
- Ask for at least three quotes with material, tear-off and warranties separated.
- Ask whether the price includes tearing off the old roof, repairing the decking and the permit.
- Compare with your state in the table, but remember it varies a lot by area and contractor.
- If you are going to install solar panels, consider replacing the roof before installing them.
Using the number in negotiations
A state average is a good sanity check for a quote. If a bid is far below the range, ask what has been left out: tear-off, decking, underlayment, flashing, permits or warranty. If it is far above, ask what justifies it, such as a steep pitch, a complex roof, rotten decking or a premium material. The aim is not to pay the average but to understand each difference.
Does the table include tear-off and permits?
The source does not say clearly, so ask each contractor. Tear-off ($1 to $5 per square foot according to HomeGuide) and decking repairs ($2 to $5) are the extras that most often change the total.
Why do the sources give such different ranges?
UseCalcPro, SquareDash and HomeGuide use different data, years and assumptions, as the comparison table shows. HomeGuide’s ranges are much wider because they include more kinds of projects.
When should I ask for quotes?
Before you have an emergency. Roofers get busy after storms, and having two or three estimates in hand lets you act without pressure.
For other angles on the price, see the cost per square foot, metal versus asphalt and how to compare roofing quotes.
How to use all this
The most useful thing a state average does is tell you what is normal where you live. If your quote is within the range, you are not being overcharged by a large margin, and you can focus on the material, the warranty and the contractor. If it is far outside, ask what is different. Either way, the price of a roof is a matter of your roof, so get it measured.
