How Much Does a New Roof Cost per Square Foot?

WIDTH × LENGTH × PITCH COST PER SQ FT$3 to $30depending on the material

A new roof costs, installed, between about $3 and $30 per square foot depending on the material: asphalt shingles are at the low end and slate at the high end. For asphalt shingles, which are the most common, sources give anywhere from $2 to $13, and that gap is the reason to ask for several quotes.

$3 to $6Installed asphalt shingles per square foot, according to HomeGuide
$5 to $16Installed metal per square foot, according to HomeGuide
$4 to $11Total range per square foot with common materials, according to NerdWallet with Angi data
1 square = 100 sq ftRoofers quote by the square: $300 to $600 per square of asphalt at HomeGuide

Calculate the cost of your roof per square foot

Roof area–
Squares (100 sq ft)–
Cost range–
Average cost–

Our own calculation. The prices per square foot are from HomeGuide; the tear-off at $1 to $5 per square foot is too. The roof is calculated by multiplying the footprint by the pitch factor (geometry: 1.054 / 1.118 / 1.202 / 1.414), which does not include eaves, chimneys or skylights, and HomeGuide uses a very similar factor (1.12) in its table by size. We do not know whether HomeGuide’s price per square foot already includes the tear-off: that is why we leave it as an option.

What each material costs per square foot

$0$10$20$30Installed cost per square foot (dollars), according to HomeGuideAsphalt$3–$6Flat$3–$11Wood (shakes)$7–$15Metal$5–$16Clay or cement tile$7–$25Slate or stone$10–$30
HomeGuide installed ranges (undated), the only source that offers all materials on the same basis.
MaterialPer square footPer square (100 sq ft)
3-tab asphalt$3 to $5$300 to $500
Architectural asphalt$4 to $6$400 to $600
Luxury asphalt$5 to $7$500 to $700
Wood (cedar)$5 to $12$500 to $1,200
Metal shingles$6 to $14$600 to $1,400
Standing-seam metal$9 to $16$900 to $1,600
Composite or rubber$7 to $14$700 to $1,400
Solar roof (solar shingles)$21 to $40$2,100 to $4,000

Source: HomeGuide, cost to replace a roof (undated; data from its members’ projects). Its page is not consistent throughout: it gives $300 to $600 per square in one place and $400 to $900 in another.

Do the sources agree?

No. For asphalt shingles the range runs from about $2 to about $13 per square foot depending on who is counting, probably because some talk only about the material, others about the installed price and others mix shingle types. We cannot confirm it because almost none explain their method.

$0$4$8$12$16Asphalt shingles: cost per square foot (dollars) by sourceHomeGuide$3–$6Angi (metal vs. shingles)$2–$4NerdWallet (with Angi data)$4–$11NerdWallet, shingles page$4–$12Inch Calculator$4–$13
Ranges per square foot from each source; those from NerdWallet, Angi and Inch Calculator are rounded to whole dollars. The Angi one (metal vs. shingles) is from an undated page and probably covers materials only.

Sources: HomeGuide, Angi, NerdWallet (roof cost), NerdWallet (shingles) and Inch Calculator (its page says it was updated in 2023, although it mentions 2026).

From the house’s area to the roof’s area

The roof is always larger than the footprint of the house because it is sloped. The footprint is multiplied by a factor that depends on the pitch (our own calculation): 1.054 with a 4/12 pitch, 1.118 with 6/12, 1.202 with 8/12 and 1.414 with 12/12. HomeGuide uses a factor similar to the 6/12 one for its table by size.

House (one story)Roof (6/12)Cost, according to HomeGuide
1,000 sq ft1,120 sq ft$3,500 to $6,700
1,500 sq ft1,675 sq ft$5,000 to $10,100
2,000 sq ft2,235 sq ft$6,700 to $13,400
2,500 sq ft2,795 sq ft$8,500 to $16,800
3,000 sq ft3,355 sq ft$10,100 to $20,100

Source: HomeGuide, one-story homes with a 6/12 pitch.

A worked example with pitch

Take a one-story house with a 2,000 square foot footprint. Using the pitch factors above, the roof area is about 2,108 square feet at 4/12, 2,236 at 6/12 and 2,404 at 8/12. At the architectural asphalt price of $4 to $6 per square foot, the 6/12 roof comes to roughly $8,900 to $13,400 (our own arithmetic). The same house with an 8/12 pitch has about 7% more roof, so it costs about 7% more before any steepness surcharge.

What “per square” means

Roofers often quote by the square, which is 100 square feet of roof, and it is a common source of confusion. A quote of $450 per square is $4.50 per square foot. If one bid is quoted per square and another per square foot, convert them to the same unit before you compare. The same goes for whether tear-off, underlayment and flashing are included in the unit price.

What is not in the price per square foot

A source’s price per square foot may not include tear-off, decking or repairs. HomeGuide gives them separately:

ItemPer square foot
Tearing off the old roof$1 to $5 (HomeGuide)
Roof decking$2 to $5 (HomeGuide)
Trusses$5 to $14 (HomeGuide)
Framing$6 to $15 (HomeGuide)

Source: HomeGuide. Always ask whether the quote includes these items and the permits.

Why asphalt prices range so widely

The sources cover asphalt from about $2 to $13 per square foot, and the explanation is probably in what each counts. Material only is cheaper than installed. 3-tab shingles are cheaper than architectural or luxury ones. Labor varies by region and by roof complexity. A single average cannot reflect all of that, so the table in this guide splits the types, and we recommend you do the same when you talk to a contractor.

How to use these prices

  1. Measure the footprint of the house and calculate the roof area using the pitch, or ask the contractor to measure it.
  2. Choose the material and look at the range in the table: it is a reference, not a quote.
  3. Ask for at least three quotes, per square and in total, with tear-off, decking and permits separated.
  4. Compare how many squares each contractor quotes: if they differ, ask why.
  5. Use the calculator above to check whether the total you are given is reasonable.
Which shingle type should I ask for?

Architectural shingles are the most common choice and cost a bit more than 3-tab, with luxury ones at the top. Ask for the product line, the warranty and the rating that applies in your climate.

Do quotes by square foot include everything?

Not necessarily. Tear-off ($1 to $5 per square foot), decking ($2 to $5) and permits may be separate, as the table shows.

Is the cheapest per-foot price the best deal?

Only if the scope is identical. A low price that leaves out tear-off, underlayment or flashing can end up costing more.

For totals by house size and by state, see roof cost by house size and the cost calculator by state. If you are deciding between materials, metal versus asphalt compares them directly.

Remember

No single price per square foot is correct for every house. The material, the pitch, the number of layers to remove and the local labor market all move it. Use the figures here to judge whether a quote is reasonable, then ask each contractor to show how the total is built. A transparent breakdown is worth more than a low number you cannot explain.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top