Going solar is one of the biggest purchases a homeowner makes, and the information around it is a mix of sales pitch, outdated incentives and averages that hide the details. This guide pulls the whole decision into one place: what a system costs in 2026, what it saves, how to be paid for the electricity you send back, whether a battery makes sense, and how to check a quote before you sign.
Everything below uses the same sources and the same arithmetic as the detailed articles on this site, so you can follow any number back to where it came from. Where we do our own calculation we say so. Where sources disagree, we show both. Each section ends by pointing to the article that goes deeper, so treat this page as the map and those articles as the street view.
What solar really costs in 2026
The simplest way to compare quotes is cost per watt: the total price divided by the system size in watts. EnergySage puts the national average at about $2.60 per watt before incentives. A 12 kW system, the size quoted most often, therefore costs about $31,000. A smaller 8 kW system costs about $21,000 at the average of its size bracket. Size matters because some costs do not scale with the number of panels: the permit, the inspection, the sales and design time and the electrical work are similar for a small system and a large one, so each watt of a small system carries more of them.
| System size | Average cost per watt | Average cost before incentives |
|---|---|---|
| 4 kW | $2.89 | $11,560 |
| 5 kW | $2.78 | $13,900 |
| 6 kW | $2.68 | $16,080 |
| 7 kW | $2.62 | $18,340 |
| 8 kW | $2.62 | $20,960 |
Source: EnergySage averages by system size, as used in our cost per watt article. The total is the size in watts multiplied by the cost per watt.
The state you live in changes the picture a lot. In our state-by-state cost calculator the average runs from $2.12 per watt in Florida to $3.72 in Alabama. For an 8 kW system that is the difference between $16,960 and $29,760, a gap of almost $13,000 for the same number of panels. Part of that comes from local labor, permit rules and competition between installers, and part from how mature the local market is. It is also a reminder that a national average is only a starting point: your own quotes are what count.
Where the money goes
Equipment (panels, inverters, racking and wiring) is only part of the bill. In the breakdown we use, equipment comes to about $14,011 on a typical system, around 45% of the total. The rest is labor, permits and inspection, the installer’s overhead and margin, and the cost of finding the customer in the first place. That is why two quotes with identical panels can differ by thousands of dollars, and why the cheapest price per watt is not automatically the best offer: look at what the installer includes, how long they have been in business and who stands behind the work.
How to read a quote
Ask every installer for the same four numbers: the system size in kW, the total price before incentives, the price per watt and the estimated first-year production in kWh. With those you can compare quotes on equal terms. A $24,000 quote for a 9 kW system is $24,000 ÷ 9,000 W = $2.67 per watt, a bit above the national average, so it is worth asking why: higher-efficiency panels, a battery-ready inverter or a complicated roof can all explain it. If the price is lower than average, ask what is missing. Make sure the quote states the panel and inverter models, the warranties and who pulls the permits.
The federal tax credit is gone: what that does to the math
For years the 30% federal tax credit was the first line of every solar calculation. For buyers it no longer exists, and the prices in this guide do not include it. On a 12 kW system costing about $31,000 the credit would have been worth up to $9,300 (our own calculation on the EnergySage average), so its absence is real money, and it is the main reason payback periods are longer than the ones you may have read in older articles.
That does not make solar a bad purchase in every case. It means the decision now depends more on three things you can check: what you pay per kWh for grid electricity, how much of your solar production you use yourself, and whether your state or utility offers any incentive of its own. Our article on whether solar is worth it without the credit walks through the numbers with and without a $5,000 state incentive, and our guide to state rebates and incentives shows where to look for them.
| Annual savings on your bill | Payback with no incentive | Payback with a $5,000 state incentive |
|---|---|---|
| $1,500 | 20.7 years | 17.3 years |
| $2,400 | 12.9 years | 10.8 years |
| $3,200 | 9.7 years | 8.1 years |
Our own calculation on a $31,000 system: price divided by yearly savings. A $5,000 incentive is the example EnergySage uses, not a promise that you will get one.
The table shows why the same system can be a good investment for one household and a poor one for another. At $1,500 of savings a year the payback is longer than most people will want to wait; at $3,200 it is under ten years. The panels are the same. What changed is how expensive the electricity they replace is and how much of it they cover.
How many panels you need
Sizing is arithmetic, not guesswork. Start from your annual consumption in kWh, which is on your electric bill or in your utility account. Divide by the kWh each kW of panels produces in your area in a year (a figure installers call the production ratio), and you get the system size in kW. Our solar panel calculator does this for you, and also shows the roof area the panels need, at about 21 square feet per panel.
Three things move the result more than anything else. The first is your consumption, which is why an efficient house needs fewer panels. The second is the sun at your address, and the shade, direction and tilt of your roof. The third is what you plan to add: an electric car or a heat pump can raise your use by thousands of kWh a year, and it is cheaper to size for that now than to add panels later.
Do you have to cover 100% of your use?
Not necessarily. Covering 100% on paper means you export a lot of electricity at midday, when you are not home, and buy it back at night. How much that costs you depends on the rules your utility applies to exports, which the next section explains. In a place that pays well for exports, aiming for 100% makes sense. Where exports are paid at a fraction of the retail price, a slightly smaller system that you consume mostly yourself can have a better payback per dollar spent.
The roof sets the limit
Your roof decides how many panels physically fit, and its age decides whether now is the right time. Putting panels on a roof that needs replacing in a few years means paying to remove and reinstall them later. If your roof is more than halfway through its life, read our roof lifespan guide before you sign, and consider doing both jobs together. The other pillar guide on this site, on replacing a roof, covers that timing in detail.
What solar saves: a worked example
Savings are the part of a solar quote most likely to be rounded up in your favor, so it is worth doing the arithmetic yourself. Take an 8 kW system in Texas, where the average cost is $2.26 per watt. The price is 8 × 1,000 × $2.26 = $18,080 before incentives. If the system produces 10,000 kWh in a year and each kWh saves you $0.16, you save $1,600 a year. The simple payback is $18,080 ÷ $1,600 = about 11.3 years.
Now change one number. If the value of a kWh is $0.20 instead of $0.16, the savings become $2,000 a year and the payback falls to about nine years. Electricity prices are the most sensitive input, which is why the same system pays back in half the time in a state with expensive power. Our payback calculator by state lets you change the price per kWh, the production and the share of your use you offset, and see the result straight away.
What a simple payback leaves out
A simple payback divides the price by the first year’s savings. It ignores several things that pull in opposite directions. Panels lose a little output every year, which lowers savings. Electricity prices usually rise over time, which raises them. A loan has interest, which adds to the real cost. Maintenance, an eventual inverter replacement and any change in your own consumption all move the result. The simple number is a good first filter, not a forecast, and a payback longer than about 15 years should make you stop and ask whether the project still makes sense for you.
Net metering: how you are paid for what you export
Your panels produce the most electricity at midday, and most households use the most in the evening. The difference goes to the grid, and how it is valued is one of the most important and least understood parts of a solar offer. Under traditional net metering, each kWh you export offsets a kWh you buy later, at the full retail price. Under net billing or similar rules, exports are paid at a lower rate, often close to the utility’s wholesale cost.
The example in our net metering article makes the effect clear. A system produces 10,000 kWh in a year and you use 4,000 of them at home as they are produced, worth $640 at $0.16 each. The other 6,000 kWh are exported. With full-price net metering they are worth $960, for $1,600 in total. Under a rule that pays $0.05 per kWh (an illustrative figure, not a quote) they are worth $300, and the total is $940. The same panels produce the same electricity, but the value drops by about 40%.
What to ask your utility before installing
- Which compensation rule applies to new customers, and for how many years it is guaranteed.
- Whether there are time-of-use rates, and when the export price is highest.
- Whether there is a monthly fixed charge or a minimum bill that panels cannot reduce.
- What happens to the rule if you add a battery later.
Rules change, and they sometimes protect existing customers for a fixed period. A good installer will tell you which rule applies to your address and show the production estimate with that rule applied, not with the most generous one.
Buy, finance or lease
How you pay for solar changes who benefits from it, and the same panels can be a good deal under one structure and a poor one under another. Our comparison of buying, financing and leasing covers the details; this is the short version.
Paying cash
You own the system from day one, and every dollar of savings is yours. It has the highest upfront cost and the shortest payback, because no interest is involved.
Financing with a loan
You own the system and pay it off over time. EnergySage estimates payments of $220 to $350 a month on a $30,000 system, depending on term and credit. Solar loans usually carry interest between 6% and 12%, and the rate decides whether the monthly saving covers the monthly payment.
Lease or power purchase agreement
You pay little or nothing upfront, and the company owns the system. Many contracts raise the price by 1% to 3% each year; EnergySage recommends looking for 1% or less, or none at all. You also will not receive any tax benefit tied to ownership.
An owned system can raise the value of a home by about 5% to 10%, according to EnergySage, while a leased one adds little or nothing to a sale and can complicate it, because the buyer has to take over the contract. If you may sell within a few years, read our article on whether solar panels increase home value for what the studies actually measured, and be careful with any contract that is hard to transfer or cancel. EnergySage gives an example where, with $15,000 still outstanding, cancelling a lease could cost $20,000.
Should you add a battery?
A battery stores solar production for the evening or for an outage. It can lower your bill when exports are paid poorly, and it can keep the lights on during a blackout. It also adds a large cost, and its payback is much longer than that of the panels themselves.
In Texas, where the average battery price in our article is $1,059 per kWh, a 13.5 kWh unit costs about $14,297. If you use 10 kWh from it on 300 days a year and each kWh saves you $0.20, you save $600 a year, and the payback is $14,297 ÷ $600 = about 23.8 years. That is close to the life of the battery itself, which has its own warranty clock. A whole-home backup installation is more expensive again: EnergySage puts it at about $34,000.
- A battery is more likely to pay off where exports are paid at a low rate, where electricity prices change a lot during the day, or where outages are frequent and costly.
- It probably will not pay off where full-price net metering already values your exports, where outages are rare and short, or where you only want it for peace of mind and the cost is not affordable.
Our article on solar with a battery shows the payback state by state, with three levels of annual savings. For backup power alone, compare it with a generator in generator vs. home battery before deciding, because for some homes a generator covers the same need for far less money.
How long the system lasts
Solar panels do not stop working on a given day; they lose output slowly. EnergySage indicates that manufacturer warranties expect a 2% to 3% loss in the first year and then between 0.5% and 0.7% a year. The best-rated manufacturers reach 0.25% a year. Warranties commonly guarantee at least 90% of the original power at 10 years and 80% at 25 years, and real systems usually stay above that.
Three warranties are often mixed up: the product warranty on the panel itself, the power warranty on how much it should still produce, and the workmanship warranty from the installer on the installation. The workmanship warranty is the one that matters if the roof leaks where the panels are attached, and it is only as good as the company that gives it. Check how long the installer has been in business, because a 25-year promise from a company that disappears in three years protects nothing.
The inverter usually fails before the panels, and replacing it is a cost you should plan for. Our guide to how long solar panels last lists the warranty terms of several brands and explains how to keep track of performance once the system is running, for example by comparing the monthly production with the estimate you were given.
A decision rule for your own case
After the numbers, the decision comes down to a few honest questions. These are the ones that settle most cases.
- What is your real price per kWh? Divide your total bill by your kWh for the last twelve months, including fixed charges. If it is low, solar saves less.
- What does your utility pay for exports? Full retail and a lower rate can differ by 40% in value, as the example above shows.
- What is the state of your roof? A roof near the end of its life should be replaced first, or at the same time.
- How long will you stay? If you sell within a few years, an owned system can help the sale, but payback may not be complete.
- Can you pay for it comfortably? A loan whose payment is higher than your monthly saving is a bad sign.
If the payback comes out under about ten years with a conservative production estimate, solar is usually worth serious consideration. Between ten and fifteen years it depends on how long you will stay and how you value energy independence. Beyond fifteen years, other upgrades such as insulation, windows or a more efficient heating system may save more per dollar; our upgrade payback calculator compares them.
Before you sign: a short checklist
- Get at least three quotes, each with system size, price per watt and estimated first-year production.
- Ask for the panel and inverter brands and models, and read their warranty documents.
- Confirm who pulls the permits, who handles the utility interconnection and how long each takes.
- Ask what compensation rule applies to your exports and for how long.
- Check that the installer holds the license your state requires and has reviews that describe problems being fixed, not only the sale.
- Do not sign on the day of the first visit, and be wary of any pressure that relies on a deadline for an incentive you cannot verify.
- Keep a copy of the contract, the design drawings and every warranty.
Solar done well is a long-term asset. Done in a hurry, it is a long-term bill. The time you spend comparing quotes is among the best-paid hours in the whole process.
Frequently asked questions
How much does a typical home solar system cost in 2026?
EnergySage puts the national average at about $2.60 per watt before incentives, which is about $31,000 for a 12 kW system. By state the average ranges from $2.12 per watt in Florida to $3.72 in Alabama in our calculator.
Is there still a federal tax credit for solar?
No. The 30% federal credit no longer exists for buyers, so the prices and paybacks on this site are shown without it. Some states and utilities have their own incentives, which you can check in our guide to state rebates.
How long does it take for solar to pay for itself?
It depends mostly on the price of grid electricity and how your exports are paid. In our examples the payback ranges from about 9 years at high electricity prices to more than 20 years at low savings.
Will panels still work in a power outage?
A grid-tied system without a battery shuts off during an outage for safety reasons. To keep power during a blackout you need a battery or a generator.
Do solar panels increase the value of my home?
EnergySage says an owned system can raise value by about 5% to 10%, but studies differ and a leased system adds little. See our article on home value for what each study measured.
Is it better to buy or lease?
Buying gives the highest lifetime savings. Leasing lowers the upfront cost but usually reduces the total benefit and can complicate selling the house.
This guide is the overview. For your own numbers, start with the solar panel cost calculator by state, size your system with the panel calculator and test your payback with the savings calculator. If you are comparing options for the roof, read about solar shingles vs. panels. And if what worries you is power during storms, the generator vs. battery comparison will help you decide. Figures in this guide come from EnergySage and the other sources named in each linked article. They are estimates for general information, not a quote or professional advice. Read how we research and update our guides.
