Solar panels cost an average of about $2.60 per watt in the U.S. before incentives, according to the quotes collected by EnergySage in 2026. For a 12 kW system, that is about $31,000. The state changes the figure a lot: from $2.12 per watt in Florida to $3.72 in Alabama.
Use the calculator on this page to estimate the cost based on your state and the size of your system. Below you have the full table, the reasons for the differences between states and what this estimate does not include.
Solar Panel Cost Calculator
EnergySage average prices by state, updated in November 2026. They are estimates, not quotes.
How the estimate is calculated
An 8 kW system in Texas, where the average is $2.26 per watt, costs 8 × 1,000 × $2.26 = $18,080 before incentives.
Not sure what size you need? Installers usually size the system based on your annual electricity use. Add up the kilowatt-hours (kWh) from your last 12 electric bills and give that number to the installer, who will turn it into a system size based on your roof and the sun in your area.
Solar panel cost by state in 2026
The table is sorted from the lowest cost per watt to the highest. The last two columns apply that price to an 8 kW system and a 10 kW system. They are two example sizes to compare states, not a recommendation for your home.
| State | Average cost per watt | 8 kW system | 10 kW system |
|---|---|---|---|
| Florida | $2.12 | $16,960 | $21,200 |
| Arizona | $2.25 | $18,000 | $22,500 |
| Texas | $2.26 | $18,080 | $22,600 |
| Mississippi | $2.29 | $18,320 | $22,900 |
| Louisiana | $2.31 | $18,480 | $23,100 |
| Nevada | $2.35 | $18,800 | $23,500 |
| Arkansas | $2.37 | $18,960 | $23,700 |
| Oregon | $2.40 | $19,200 | $24,000 |
| North Carolina | $2.44 | $19,520 | $24,400 |
| Washington | $2.47 | $19,760 | $24,700 |
| Kentucky | $2.48 | $19,840 | $24,800 |
| Missouri | $2.49 | $19,920 | $24,900 |
| New Mexico | $2.49 | $19,920 | $24,900 |
| Georgia | $2.50 | $20,000 | $25,000 |
| California | $2.52 | $20,160 | $25,200 |
| Montana | $2.54 | $20,320 | $25,400 |
| Maryland | $2.55 | $20,400 | $25,500 |
| Ohio | $2.56 | $20,480 | $25,600 |
| Virginia | $2.56 | $20,480 | $25,600 |
| South Carolina | $2.57 | $20,560 | $25,700 |
| Oklahoma | $2.57 | $20,560 | $25,700 |
| Indiana | $2.59 | $20,720 | $25,900 |
| New Jersey | $2.60 | $20,800 | $26,000 |
| Pennsylvania | $2.60 | $20,800 | $26,000 |
| Colorado | $2.63 | $21,040 | $26,300 |
| Delaware | $2.63 | $21,040 | $26,300 |
| Kansas | $2.66 | $21,280 | $26,600 |
| Connecticut | $2.67 | $21,360 | $26,700 |
| New York | $2.77 | $22,160 | $27,700 |
| Vermont | $2.78 | $22,240 | $27,800 |
| Rhode Island | $2.80 | $22,400 | $28,000 |
| Michigan | $2.86 | $22,880 | $28,600 |
| New Hampshire | $2.88 | $23,040 | $28,800 |
| Massachusetts | $2.90 | $23,200 | $29,000 |
| Maine | $2.91 | $23,280 | $29,100 |
| Illinois | $2.92 | $23,360 | $29,200 |
| Idaho | $2.95 | $23,600 | $29,500 |
| Wisconsin | $3.03 | $24,240 | $30,300 |
| Washington, D.C. | $3.20 | $25,600 | $32,000 |
| Minnesota | $3.23 | $25,840 | $32,300 |
| Iowa | $3.26 | $26,080 | $32,600 |
| Hawaii | $3.44 | $27,520 | $34,400 |
| Tennessee | $3.48 | $27,840 | $34,800 |
| Alabama | $3.72 | $29,760 | $37,200 |
Source: EnergySage data on the cost of solar by state, updated November 6, 2026. Prices are averages of quotes, before incentives. Alaska, Nebraska, North Dakota, South Dakota, Utah, West Virginia and Wyoming do not appear in that data.
Why the same system costs more in some states than in others
A state’s average is only a starting point. Several things raise or lower a quote:
- Labor and permits. Installer wages and the cost and speed of permits change from one state to another and even from one city to another.
- Competition. Where many installers compete for the same customers, quotes tend to be lower.
- Equipment and shipping. Remote areas and islands can add shipping costs.
- Your roof. The pitch, material, shade and distance to the electrical panel change the work needed.
Some state averages rest on fewer quotes than others. If your state is at the top or bottom of the table, take it as a reason to compare local quotes, not as a fixed price.
The difference between two states, in dollars
For an 8 kW system, Florida’s $2.12 per watt gives $16,960 and Texas’s $2.26 gives $18,080, a gap of $1,120. That is real money but not decisive on its own, because the sunshine, the electricity price and the incentives of each state matter more to what you save later. The national average of about $2.60 per watt gives about $31,000 for a 12 kW system, as in the introduction. Use the table to see where your state sits and then focus on comparing actual quotes.
How to read a quote
- Price per watt before and after incentives, and which incentives are included.
- Brand and wattage of the panels, and the type of inverter.
- Estimated annual production in kWh, and how it was calculated.
- What happens to roof work, electrical panel upgrades and permits.
- Warranties for equipment, performance and workmanship.
- Monitoring, and who services the system.
The federal tax credit no longer exists, and these prices do not include it
The IRS says the 30% residential clean energy credit is not available for installations placed in service after December 31, 2025. You can check it on the official IRS page.
The prices in the table are before any incentives, so what you pay depends on the incentives from your state, your city and your utility. The database DSIRE collects incentives and policies by state.
Leases and power purchase agreements work differently. The installer owns the system and can claim a business tax credit, which can affect your monthly payment. Ask for the full terms in writing and, for any tax matter, consult a professional.
To see the effect of an incentive on your estimate, enter its amount in the calculator: it subtracts it from the total.
Sizing the system to your use
A system is usually sized to cover your annual electricity use. Add up 12 months of kWh from your bills and give the installer that number: they will use the sun at your address to work out the size in kW. A larger system costs more but produces more, and what the utility pays for excess energy changes whether that is a good idea. Our guide to how many panels you need walks through that.
What this estimate does not include
- Storage batteries, which are quoted separately.
- Roof repairs or replacement before installing the panels.
- Electrical panel upgrades, if your home needs one.
- Financing costs, such as loan interest.
- How much you will save on electricity. It depends on your utility’s rates and how it credits the energy you send to the grid.
From estimate to real quote
An estimate tells you what range to expect. A quote tells you what you will pay. Ask for detailed quotes from at least three licensed installers in your area, with equipment, labor and permits itemized, and compare them by cost per watt, not just total price. Electrical and roofing work must be done by licensed professionals, and permit and grid-connection rules vary by state and city.
Why is my state missing?
EnergySage’s table does not include Alaska, Nebraska, North Dakota, South Dakota, Utah, West Virginia or Wyoming. In those states, local quotes are the only reliable guide.
Do the prices include batteries?
No. Batteries are quoted separately. See whether a solar battery is worth it.
How long will it take to pay back?
That depends on your electricity price, production and incentives. Use the solar savings calculator for a first answer.
If you are comparing ways to pay, read buy, lease or finance, and for the post-credit outlook, solar without the federal credit.
The practical next step
Pick your state, run your system size through the calculator, and then collect at least three quotes. If a quote is far above or below the estimate, ask why: the answer is usually in the equipment, the roof, the electrical work or the scope. If you are unsure about your size, start with your annual kWh and let the installers propose a system, then compare their numbers with ours.
If this raised more questions, Is Solar Worth It Without the Federal Tax Credit? goes into more detail, and Solar panel cost per watt in 2026 covers the next step.
