Whole-House Generator Cost Calculator

Standby generator

A whole-house standby generator usually costs, installed, between $6,000 and $11,000 according to HomeGuide, and up to $24,000 if it exceeds 20 kW or the installation is complex. Generac, a manufacturer that sells them, speaks of $8,000 to $16,000 in total. The price depends mostly on power, fuel and the installation work: pad, gas line, permits and labor.

$6,000 to $11,000Average installed (HomeGuide)
$9,500 to $24,000More than 20 kW or long runs (HomeGuide)
$8,000 to $16,000Total cost given by Generac (manufacturer)
$200 to $650Maintenance per year (HomeGuide)

How much would a generator for your whole home cost?

Minimum upfront cost–
Maximum upfront cost–
Annual cost (maintenance and fuel)–

Our own calculation with HomeGuide’s ranges (undated): equipment by size, labor, permits, concrete pad, gas line (feet × $12 to $25) or propane tank, maintenance ($200 to $650 a year) and fuel per outage day. The sources do not clarify whether labor already includes the transfer switch, which is why it is optional: do not add both without asking. The 30 feet of line and the 3 days are examples.

What power you need

HomeGuide relates home size to power: 13 to 16 kW under 1,500 sq ft, 17 to 20 kW between 1,500 and 3,000, and 22 to 25 kW between 3,000 and 5,000. But the page itself contradicts itself (it says a 3,000 sq ft house needs 13 to 20 kW), and Angi sizes by what you want to power, not by square footage. An installer should measure your actual loads. Generac notes that a transfer switch, a load controller and, in some homes, an upgrade to the panel, the meter or the propane tank may be needed.

Equipment cost by home size (HomeGuide)$0$5,000$10,000$15,000$20,00013-16 kW (under 1,500 sq ft)$3,000 to $4,50017-20 kW (1,500-3,000 sq ft)$4,000 to $6,00022-25 kW (3,000-5,000 sq ft)$4,500 to $12,00030-48 kW (very large homes)$10,000 to $16,000
Equipment only, without installation. HomeGuide, undated. The 22 to 25 kW range runs from $4,500 to $12,000.

Sources: HomeGuide and Generac (manufacturer).

What each power level covers

PowerEquipmentWhat it usually covers (Angi)
7.5 to 10 kW$2,000 to $3,500The essentials plus a well pump and furnace fan
14 to 18 kW$4,000 to $5,500The essentials plus air conditioning and water heater
20 to 24 kW$5,000 to $6,500Most appliances, several air conditioners and an electric range
26 to 32 kW$6,500 to $15,000Large HVAC and several water heaters
36 to 48 kW$14,000 to $21,000The whole house, with commercial-grade equipment

Source: Angi (2024 data, updated June 28, 2024). Angi contradicts itself on several totals: for example, it gives an average of $5,174 and also close to $17,000 for a complete house.

What you pay besides the equipment

  • Labor: $3,000 to $5,000, or $5,000 to $12,000 or more with long runs or more than 20 kW (HomeGuide).
  • Transfer switch: $600 to $2,500 for installation (HomeGuide); Angi puts it at about $1,200.
  • Concrete pad: $150 to $400 (HomeGuide).
  • Gas line: $12 to $25 per foot (HomeGuide).
  • Propane tank: $400 to $1,800 (HomeGuide).
  • Permits: $80 to $450 (HomeGuide).

The extras, added up

The equipment is rarely the whole price. Take the HomeGuide ranges from the list above and add them for a typical case with a 30-foot gas line (our own sum, before the equipment itself):

  • Low end: labor $3,000 + transfer switch $600 + pad $150 + gas line $360 (30 ft at $12) + permits $80 = about $4,190.
  • High end: labor $5,000 + transfer switch $2,500 + pad $400 + gas line $750 (30 ft at $25) + permits $450 = about $9,100.

A propane tank, if you need one, adds $400 to $1,800 on top. That is why two homes with the same generator can receive installed quotes thousands of dollars apart, and why the $6,000 to $11,000 average in HomeGuide and the $8,000 to $16,000 from Generac, a manufacturer, can both be true.

What it costs to run during an outage

Daily cost of running during an outage (15-20 kW generator)$0$50$100$150$200Natural gas$22 to $40Diesel$90 to $120Propane$145 to $170
According to HomeGuide, for a 15 to 20 kW generator. Bob Vila gives different figures ($90 a day with natural gas, $220 with propane and $175 with diesel), and the sources do not explain the difference.

HomeGuide gives a lifespan of 15 to 30 years and annual maintenance of $200 to $650. Bob Vila recommends servicing it every 200 hours of operation or every two years.

Sources: HomeGuide and Bob Vila (published in 2021 and modified in 2024).

The cost over ten years

Buying is a one-time event; keeping it ready is not. With HomeGuide’s $200 to $650 a year for maintenance, ten years of service comes to about $2,000 to $6,500. The same source gives a life of 15 to 30 years, so a generator installed today will probably need its maintenance budget for most of that time. Bob Vila suggests servicing it every 200 hours of operation or every two years, whichever comes first. If you rarely lose power, that age-based schedule is the one that matters.

Is it worth it for your home?

It usually makes sense when

Outages are frequent or long, someone relies on medical equipment, a well pump or sump pump must keep running, or you work from home.

It may not when

Outages are short and rare, you only need a few essentials, or a battery or portable generator could cover them for less.

That last comparison is worth doing before you request quotes. Our articles on standby versus portable generators and generator versus battery lay out the trade-offs.

Deciding, step by step

  1. Make a list of what you want to power in an outage: refrigerator, heating, air conditioning, well pump.
  2. Ask a licensed installer to measure your loads and recommend the power.
  3. Choose the fuel according to what you already have: natural gas, propane or diesel.
  4. Ask for at least three written quotes with equipment, switch, installation work, permits and warranty.
  5. Ask about annual maintenance and the warranty terms.

What to ask each installer

  • Did you measure my actual loads, or are you quoting by square footage?
  • Is the transfer switch, pad, gas line and permit in the price, and which are extra?
  • Will the existing gas meter, service or panel handle this, or is an upgrade needed (Generac mentions the meter, the panel and the propane tank)?
  • What is covered by the warranty, for how long, and who does the service calls?
  • What happens on the day of the inspection, and who is responsible for it?
Why do the sources contradict each other?

They use different data and some are sellers. Angi, for example, gives an average of $5,174 and also close to $17,000 for a complete house. When you see this, trust written quotes for your own home over any average.

Do I need a permit?

HomeGuide lists permits at $80 to $450. Requirements are local, and your installer should handle them.

How big a generator do I need?

It depends on what you want to power, not only on square footage. Use our generator size calculator before you ask for quotes.

The honest summary: a whole-house generator is a good fit for some households and an expensive comfort for others. What separates them is not the brochure but your own history of outages, what you need to keep running, and whether the extras at your property (a long gas run, a panel upgrade, a tank) push the project from the low end of the ranges to the high end. Get that clear first and the quotes will be much easier to read.

Once you have a budget, compare it with other projects in the energy savings calculator, and plan what running it will cost with the cost per hour guide.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top