Replacing a home’s entire HVAC system, meaning the furnace or boiler together with the air conditioner, usually costs between $7,000 and $12,000 according to PickHVAC, but there are quotes of $5,000 and others of $28,000, according to CBS News. That gap is not random: it depends on a few specific factors, and you control almost all of them.
Calculate how much your quote goes up
PickHVAC ranges (May 2026), which assume a home with an accessible attic. The source does not detail its sample, and the factors do not always simply add up: this is an estimate to prepare for quotes, not a price.
What it costs by system
These are PickHVAC’s May 2026 ranges. Pay attention to the assumptions: the price changes if your home is not like the one they assume.
| System | Minimum | Average | Maximum | Assumptions |
|---|---|---|---|---|
| Gas furnace and AC (3 t) | $6,500 | $10,500 | $18,000 | Mid-efficiency furnace, 14 to 16 SEER air conditioner |
| Heat pump (3 t) | $5,500 | $9,000 | $15,000 | Outdoor unit and indoor unit |
| Ductless mini-split | $1,800 | $3,500 | $6,500 | Per indoor zone; the outdoor unit is separate |
Source: PickHVAC, cost of an HVAC system (May 2026). The figures are the site’s own estimates.
What it costs by home size
In an earlier PickHVAC publication (June 2025), the cost of a standard furnace and air conditioner grows with the size of the home, at about $3 to $6 per square foot.
| Home size | Standard furnace and AC |
|---|---|
| 1,000 square feet | $3,000 to $6,000 |
| 1,600 square feet | $4,800 to $9,600 |
| 2,000 square feet | $6,000 to $12,000 |
| 2,500 square feet | $7,500 to $15,000 |
| 3,000 square feet | $9,000 to $18,000 |
Source: PickHVAC, furnace and air conditioner cost (June 2025). The title says 2026 but the data date is 2025.
What raises the price
These are the factors that change the quote the most, with what they add according to PickHVAC. By far the biggest is redoing the ductwork.
Redoing the ductwork
$10 to $50 per linear foot. If more than 100 feet have to be replaced, it goes from $5,000 to $12,000. CBS News gives about $3,000 if the home has no ductwork.
Size and efficiency
Each extra ton adds between $1,200 and $3,000, and moving up to 20 SEER or more, between $1,500 and $4,000.
Where you live
The Northeast and West Coast run about 15% to 30% above the Midwest; rural areas, 5% to 15% below, although they can add travel charges.
CBS News adds other factors: efficiency requirements (SEER2), refrigerant changes, a shortage of technicians, emergency repairs during cold or heat waves, and upgrades to the electrical panel, thermostat or insulation.
A breakdown in the middle of summer or winter is when you negotiate worst: CBS News notes that prices rise with emergency replacements. If your equipment is old, planning the replacement calmly is one of the few ways to pay less.
Reading the ranges
PickHVAC’s table shows a gas furnace with a 3-ton air conditioner from $6,500 to $18,000, with an average of $10,500, and a 3-ton heat pump system from $5,500 to $15,000, average $9,000. A spread of that size is not an error: it reflects different homes, efficiency levels and extras. The per-square-foot figures give another way to think about it: at $3 to $6 per square foot, a 2,000 square foot home lands between $6,000 and $12,000 for a standard furnace and air conditioner, which matches the $7,000 to $12,000 usual range.
Use these numbers to know whether a quote is in the right area, and then ask each contractor to explain where it sits within the range.
Replace everything at once or only part of it?
ENERGY STAR recommends also replacing the furnace when you replace the air conditioner if the furnace is more than 15 years old. In the other direction, PickHVAC warns that a high-efficiency furnace (90% or more) costs 30% to 50% more to install than an 80% one. Replacing everything together saves trips and lets you size the whole system, but the total is higher: compare both options in writing.
Ductwork: the budget breaker
Ducts are the item most often missing from early estimates. PickHVAC gives $10 to $50 per linear foot, and says that replacing more than 100 feet can cost $5,000 to $12,000. If your home has no ductwork, CBS News mentions about $3,000 for a new installation, though a ductless system may avoid it. Leaky, undersized or poorly designed ducts also waste energy, so a new system on old ducts may underperform. Ask your contractor to inspect the ducts and to put the findings in the quote.
The load calculation question
Replacing “the same size” is easy for the installer but may be wrong for your home, especially if you have added insulation or windows since the old system went in. Ask whether the quote is based on a load calculation. An oversized system cycles on and off, wears out sooner and handles humidity poorly; an undersized one never catches up.
Incentives that remain
The federal energy efficiency improvement credit ended with equipment placed in service in 2025 (IRS). What remains are your utility’s incentives and state programs, which exist only in some states: DSIRE compiles them.
How to avoid overpaying
- Ask for at least three written quotes, with the brand, model, size, SEER2 and AFUE of each unit.
- Ask them to separate equipment, labor, ductwork, permits and extras.
- Ask whether the size comes from a load calculation or just repeats that of the previous unit.
- Check the condition of the ductwork before signing: it is the item that surprises people most.
- If you can, replace the system before it breaks down and avoid the hottest or coldest months.
Should I replace the furnace and the air conditioner together?
ENERGY STAR suggests replacing the furnace when you replace the air conditioner if the furnace is more than 15 years old. A matched system can also work better and simplify warranties, though it raises the upfront cost.
Why is a high-efficiency furnace so much more expensive?
PickHVAC warns that a furnace of 90% or more AFUE can cost 30% to 50% more and may require changes to the venting. Weigh that against your climate and how much you use heating.
Is it better to replace before it fails?
Usually, yes. Emergency replacements raise prices and shrink your options. Our guide to the best time to replace HVAC explains how to plan it.
To compare individual components, see the air conditioner replacement calculator, the heating installation guide and central air versus mini-split.
Before you sign
A whole-system replacement is among the largest home projects you will approve, and the quote deserves a close read. Make sure it names the equipment, the size, the efficiency ratings and the extras, and that the size comes from a load calculation. Compare at least three bids, and do not decide in the middle of a heat wave if you can avoid it.
Worth reading alongside this one: Air Conditioner Replacement Cost Calculator.
