Cost to Rewire a House

Rewiring a whole house costs between roughly $4,000 and $30,000, depending on the source: Angi gives $2 to $4 per square foot and Homeyou $5 to $15, with an average of $14,945. The gap is huge, so it pays to get several quotes. Use the calculator to see the range for your case.

Few home projects are as hard to price from a distance. The wiring is behind the walls, the age of the system matters, and the cheapest quote may leave out half the job. Before you look at numbers, it helps to know which job you actually need.

Full rewire, partial rewire or just a panel?

Full rewire

Most or all of the circuits are replaced. It makes sense for knob-and-tube, aluminum branch wiring or cloth-insulated cable, or when an inspection finds widespread damage. It is the most expensive route.

Partial rewire

Only the problem circuits or rooms are replaced. Ask your electrician whether this is enough for your house; it can cost much less.

Panel upgrade

If the issue is capacity and not the wiring itself, a new panel (the sources give $1,500 to $4,913 depending on size and region) may solve it.

Estimate the cost of rewiring your home

Minimum estimate–
Maximum estimate–
Midpoint–

Our own calculation using each source’s figures. Each source uses different assumptions and their ranges contradict each other: compare all three before trusting one. It does not include wall repair or painting, which are separate items and among the most expensive. Ask for written quotes.

What each item costs

ItemFigureSource
Full rewire, per square foot$2 to $4 (materials and labor)Angi
Full rewire, per square foot$5 to $15Homeyou
2,000 sq ft house$4,000 to $8,000Angi
Typical whole-house cost$10,000 to $15,000 (minimum $3,500; maximum $30,000)InchCalculator
Whole-house average$14,945 (range $7,887 to $29,588)Homeyou
Labor$50 to $100 per hour (Angi and InchCalculator); $72 to $149 (Homeyou)Various
Panel replacement (200 A)$1,500 to $2,500 (Angi); $2,500 to $4,500 (InchCalculator); $2,251 to $4,913 (Homeyou)Various
Permits and inspections$50 to $350 (InchCalculator); permit of $75 to $150 and $100 to $125 per inspection (Angi)Various
Wall repair$4 to $8 per sq ft (Angi)Angi
Knob-and-tubeRemoval of about $5,000 plus $2 to $4 per sq ft (Angi); $10 to $20 per sq ft (Homeyou)Angi, Homeyou
Aluminum wiring$5 to $12 per sq ft (Homeyou)Homeyou

Sources: Angi (undated; titled “2025”; professionals marketplace), InchCalculator (last updated: August 14, 2023) and Homeyou (updated September 24, 2026; quote-generation site).

Visual comparison

Cost of rewiring a whole house (different sources)$0$10,000$20,000$30,000Angi · 2,000 sq ft house$4,000 to $8,000InchCalculator · typical$10,000 to $15,000InchCalculator · minimum to maximum$3,500 to $30,000Homeyou · range$7,887 to $29,588Homeyou · average$14,945
The sources are not comparable with each other and contradict each other: Angi gives about $4,000 to $8,000 for 2,000 sq ft and Homeyou $7,887 to $29,588 for the whole house.

Cost per square foot

Cost per square foot by case (dollars)$0$5$10$15$20$25Rewire · Angi$2 to $4Rewire · Homeyou$5 to $15Aluminum wiring · Homeyou$5 to $12Knob-and-tube · Homeyou$10 to $20
Replacing old wiring costs more per square foot than rewiring a standard system, according to Homeyou.

What makes the job cost more

  • Wall access: Homeyou says size and wall access explain most of the difference, and InchCalculator points to wall repair as one of the biggest expenses.
  • Old wiring: knob-and-tube is removed for about $5,000 plus the rewire (Angi), or replaced at $10–$20 per sq ft (Homeyou).
  • Panel and service entrance: the panel can cost $1,500 to $4,913 and, if the utility has to replace the service line, more (InchCalculator).
  • What each quote includes: Homeyou warns that wall patching and painting are often separate items: confirm what each bid covers.

What the work looks like, day by day

A rewire is mostly about getting new cable to where the old one was. In a house with finished walls that means fishing wire through cavities and opening some drywall. A typical order of work looks like this:

  1. Inspection and a written scope, so each quote covers the same thing.
  2. Permit pulled by the electrician.
  3. New cable run and boxes installed, circuit by circuit, so parts of the house keep power.
  4. Rough-in inspection before the walls are closed.
  5. Patching and painting, which may be a separate trade or a separate line.
  6. Final inspection and removal of the old wiring where required.

Homeyou says a 1,500 to 2,000 sq ft house can take several days or more than a week. Opening the walls is the step where schedules slip, and it is also the reason wall repair is one of the biggest expenses according to InchCalculator.

Signs your home needs it

  • A breaker trips when several appliances run in one room.
  • Outlets or switches that are yellowed, brown or blackened.
  • The house was built before 1960.
  • Lights flicker often or there is a burning smell.

These are the signs Angi lists. They do not replace an inspection: a licensed electrician can tell you whether fixing parts of the system is enough.

Living in the house while it happens

Expect the power to be off for parts of the day, and dust. Move furniture away from the walls being opened, cover anything you cannot move, and plan for the fridge and any medical equipment. If someone works from home, ask which circuits will be down on which day. For longer jobs some families stay elsewhere for a few nights.

Red flags when you are collecting quotes

  • A price with no mention of a permit or inspection.
  • No written scope, only a total.
  • Wall repair “to be decided later”.
  • A request for most of the money before work starts.
  • No proof of license or insurance.

Hiring, step by step

  1. Ask a licensed electrician for an inspection and a written report on the condition of the wiring.
  2. Ask whether a partial rewire in the problem areas is enough.
  3. Ask for at least three itemized quotes, with permits, inspection and wall repair.
  4. Check each electrician’s license and insurance.
  5. Plan where you will live during the work: Homeyou says a 1,500 to 2,000 sq ft house can take several days or more than a week.

How to think about the price

If you only remember one thing from the numbers above, make it this: the electrical work and the finishing work are two different budgets. The wiring itself is labor-intensive but predictable. The patching, painting and any surprises behind the walls are what push a quote from the low end of the ranges to the high end.

That is why a clear scope matters more than a clever negotiation. Ask each electrician to list what happens if they open a wall and find something unexpected, such as old wiring spliced into the new, a damaged joist notch or insulation that must be moved. A good contractor will have a plain answer, and you will know before you sign whether a change order is likely.

Quick answers

Does my insurer care about old wiring?

Some insurers ask about knob-and-tube or aluminum wiring, or charge more for it. Tell your agent and ask in writing what documentation they accept after a rewire.

Is a house built before 1960 always a rewire?

No. Age is a warning sign (Angi lists it), not a verdict. A licensed electrician’s inspection will tell you which parts are safe and which are not.

Why are the price ranges so different between sources?

They measure different things: Angi gives $2 to $4 per square foot, Homeyou $5 to $15, and the Homeyou average is $14,945. Wall access, region, age of the wiring and what is included (patching, panel, permits) change the total. That is why we suggest three itemized quotes and not an average.

If your issue is capacity, start with the panel upgrade cost guide; if you are planning for an electric car, the numbers in what it costs to install a home charger will tell you what the new circuit adds.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top